Clilck here to go back to the main page!
 

KNF Lab Liquid Dosing, Transfer Pumps & Accessories

NEW! LIQUIPORT® Liquid Handling/Dosing Pumps with optional remote control

LIQUIPORT®

KNF NF series of liquid pumps are the convenient way to transfer liquids in the laboratory. They are resistant to chemical attack, prevent contamination of your pumped medium, and provide the longest possible lifetime when pumping corrosive liquids, gases and vapors. They are available with either local or external control capabilities. External protocols include: 0-10 VDC, Start/Stop via TTL contact, and Output Fault Alarm.

The NF100 and NF300 series are available in either polypropylene, PVDF or PTFE head materials, with FFPM valves, and as OEM models.

Pump Model Number

Flow Rate
LPM
Suction Height
Ft. Water
Max. Pressure
Head Ft. Water (psig)
NF100
32K PDF/2 pg
0.2 to 1.3 13 32 (15)
NF1.100
32K PDF/2 pg
0.2 to 1.3 13 200 (85)
NF300
32K PDF/2 pg
0.5 to 3.0 10 32 (15)
NF1.300
32K PDF/2 pg
0.5 to 3.0 10 200 (85)

 

LIQUIPORT® Liquid Handling/Dosing Pumps

Click here for the pdf brochure! KNF Liquid pumps are a convenient way to dispense, dose or transfer liquids in the laboratory. They are resistant to chemical attack, prevent contamination of your pumped medium, and provide the longest possible lifetime when pumping corrosive liquids, gases and vapors.

The ND100 and ND300 series are available in either polypropylene or PVDF head materials, with FFPM or FFPM/stainless steel valves, and as OEM models.

Pump
Model Number

Wetted Material Flow Rate
LPM
Suction Height
Ft. Water
Max. Pressure
psig
ND100TTP
32K PDF/2 pg
PVDF/Simriz® (FFPM) 0.5-1 10 15
ND1.100TTP
32K PDF/2 pg
PVDF/Simriz® (FFPM) 0.5-1 10 60
ND300TTP
32K PDF/2 pg
PVDF/Simriz® (FFPM) 1.0-3 10 15
ND1.300TTP
32K PDF/2 pg
PVDF/Simriz® (FFPM) 1.0-3 10 60
 
Liquid Pump Accessories

Adjustable Diaphragm Valves

This diaphragm valve is small, can be continuously adjusted and is suitable for air and liquid. It can be used in many ways, e.g. as an overpressure safety valve, inducing a backpressure or preventing liquid from being sucked / pushed through the pump.

Valve Type Max Flowrate Min Pressure Max Pressure
FDV 30 3 LPM 3 psig 36 psig
FDV 1.30 3 LPM 30 psig 95 psig
FDV 300 12 LPM 12 psig 36 psig
FDV 1.300 12 LPM 30 psig 95 psig
 
Pulsation Damper

This pulsation damper eliminates up to 97% of the outgoing pulsation and can be used for different purposes: - reduction of vibration in the hoses / pipes - protection of expensive measuring instruments after the pump - improving pulsation sensitive processes

Damper Type Max Pressure
FPD 06 30 psig
FPD 10 30 psig
FPD 1.06 90 psig
FPD 1.10 90 psig
 

Diaphragm Metering Pump

STEPDOS® Metering Pump

This metering pump is designed for use with neutral and aggressive liquids. They feature continuous and steady flow, even at low rpm, using a stepper motor that ensures that the suction cycle is completed at maximum speed, but the output cycle is variably controlled per selected speed. Constant speed changes by the motor and electronic control provide steady output over the entire cycle.

Pump
Model Number

Flow Rate
ml/min.
Suction Height
Ft. Water
Max. Pressure
psig
FEM 03
360
K PDF/2 pg
0.03 - 30 13 90
FEM 08
360K PDF/2 pg
0.08 - 80 13 30
Specifications for reference only and are subject to change without notice. Teflon® and Kalrez® are registered trademarks of the DuPont Co. Viton® is a registered trademark of DuPont Dow Elastomers, LLC. LABOPORT® is a registered trademark of KNF Neuberger GmbH. Simriz® is a  registered trademark of Freudenberg-NOK.
Always check corrosion-resistance charts to confirm compatibility of pump materials with your intended medium.